Due to changing my mind mid-project (I know I'm not the only one!!) I have the following for sale - I would rather sell them here than on Ebay......

2002/3 Yamaha R1 engine (with TB's & airbox) - with engine loom partly labelled & deciphered. From dropped bike so slight dents on end cover. Bought from breakers 2 years ago. £650

Locost axle - trailing arm brackets fitted but not Damper brackets (no diff - available collection only as extra).

Set of Cortina uprights with hubs - no callipers - these can be posted. SOLD

1300 crossflow - condition unknown.

Offers anyone?? I will try and find some pics, esp of the R1 engine.

Located near Guildford

Cheers

Andrew

[Edited on 3/3/08 by SaveTheDodo]

[Edited on 3/3/08 by SaveTheDodo]

U2U sent re uprights

2nd dibs on uprights

U2U Sent

U2U sent

Hi All,

Thanks for the interest - all U2U's have been replied to.

First Dibs on the uprights are as above, CraigR was first on the buzzer for the R1 engine.

Cheers

Bump for Crossflow & Axle.

The R1 engine may still be available.......

Price for the R1 engine please?

Bump - the R1 engine is still available after all, as is the Axle and Xflow.

To make things easier, I am looking for £650 for the R1 engine.

U2 sent RE R1

I bought the uprights

[Edited on 27/3/08 by D Beddows]

thats strange ive also paid for the uprights? (complete with discs and calipers £80)

and not recieved them yet !!

whats going on !

[Edited on 16/3/08 by ch1ll1]

Sounds like somebody could soon have to change his handle to; 'Dead as the....'

Dear All,

Apologies for the confusion and delays. I had 2 pairs of spare uprights although I only said I had 1.

David Beddows - I have just read your U2U regarding the hubs. My understanding was that you only needed the uprights, so that was all I sent. I will reply to your U2U.

I will certainly not be using the Royal Mail again for parcels - Uprights Hubs & Callipers came to 22kg - for which Parcelforce wanted £25 to send. Ouch.

Oh well, a lesson learned.

Andrew

Hubs received today, many thanks Andrew. Any/all issues I had have now been resolved and my previous posts have been edited to reflect that.