Board logo

FS: AP Racing Brake Bias Valve
Alfa145 - 24/2/08 at 01:29 PM

One AP Racing Brake Bias Valve / Brake Proportioning Valve. Was fitted to my car but wasn't needed, so sold as used but in excellent condition.

It's a screw type so you're not limited to any fixed settings



Retails at Demon Theives for £137 Here....

Looking for £85 or nearest offer before it goes on Ebay in a couple of days



[Edited on 24/2/08 by Alfa145]


worX - 24/2/08 at 01:30 PM

Hi there,

What size/thread are the inlet/outlets please?

Steve


Alfa145 - 24/2/08 at 02:10 PM

Not sure as I dont have the old fittings, tried to measure with my digital calipers but the battery has gone flat. By eye from the calipers the hole is about 9mm. Both the inlet and outlet seem to be the same size.