Board logo

Bargain Rod Ends / Rose joints Aerospace quality £5ea inc post
Nick Skidmore - 15/3/08 at 11:43 AM

Got a really good deal on some BRAND NEW IN PACKETS rose joints.

These are male, right hand thread rod ends, they have 1/2 unf threads and 9/16 (14.2mm) bores.

They are surplus from the Westland Wasp and were used for the track rod that trims the rotor pitch so are designed for heavy loads.

They have good strong heads / shanks in Chrome-Moly steel and an all stainless bearing that is teflon lined ala NMB / Goldline etc.

Anti corrosion phosphate coat

Individually engraved with approval No.s!!

Absolutely suited to Wishbones, trailing arms Panhard rods etc.

The bearing can even be replaced in the unlikely event that they wear out.

Priced at £5 ea inc. post, 10% off for 10 or more.

Don't bother with cheap unlined Chinese joints from Ebay at this price.

Locknuts available at modest extra cost

Got about 200 so get your car sets in.

U2U or 07903 474191 or email


RazMan - 15/3/08 at 12:38 PM

Sounds like a stonking deal Nick - amazing that such a cheap rod end will put up with the punishment of a wishbone - a good spec though

[Edited on 15-3-08 by RazMan]


omega0684 - 15/3/08 at 04:39 PM

any pics?


Nick Skidmore - 17/3/08 at 08:42 AM

I'll do an ebay 'BIN' and pictures / payment facilities wil be there.