Does anyone know of a supplier who can supply nosecone, scuttle for the Mscorley chasis design, same as Locost but 4 inches wider. I am aware that GTS can supply these but a little sceptical after reading some of the threads and since they dont respond when emailed with question abot their products

There are a lot of things said (and a Damn sight more thought!) about Darren and GTS, but I have a feeling that if you struck up a good deal with him and asked him to supply X-PARTS by X-DATE for X-POUNDS, he would probably be ok.

Having said all that I've not bought a single thing from the bloke...

Steve

its not very hard to widen a standard nosecone, should take about 2 night and 20 quids worth of materials. there has been various threads on how to do it.

well I'm avoiding the whole GTS thing cos I know where that's going...



[Edited on 8/4/08 by Mr Whippy]

I have already widened a nosecone to suit but this appears to be cracking hence me now looking.

try grinding some material from the other side that you layed the first time and then glass it up, that should stop it cracking. Glass fiber hates sharp joints.

Hi Chris

the roasdster was 2 inches wider already asked the question being a yokel

saw your old Honda S2000 at Bruntingthorpe didn't seem half as fast as it was at york pre steering failure

Wierd, my mcsorely takes a standard nose but the scuttle is wider. wonder if you could borrow a standard nose to test.

Cheers

Rich

mine is deffo wider at the front by 4 inches as I widenened it from the Book dimensions and a standard cone definitely doesn't fit

F27 do a wide bodied version,
contact image sports cars ltd , they may be able to help??