Cash and space injection needed so its clear out time
T9 gear box.....
With 1.8 zetec fly wheel + New valeo clutch kit to suite + new capri long thrust bearing + new zetec spigot bearing + used but good Dohc starter motor
+ Tin cover that goes in between engine and box (needs bit adding to suite zetec)
So thats all the corect bits to make a zetec rwd in one place...........£130
2.0 Zetec Apr 1994 Silver top I bought the car to get this engine as a spare. It had done 98k miles.
It comes with 1.8l escort fly wheel + 1.8l water pump and pulley not yet fitted + new head gasket set and bolts new cambelt all not yed fitted. I also
have a new set of rings, (1 oil control ring is used).
So thats a pre Aug 95 engine for getting through sva with the bits to freshen up.................................£220
[edit to remove bits ive binned or sold
[Edited on 2/10/08 by big_wasa]
U2U sent
Thats a hell of a clear out you're having there wasa!
If you were closer I'd have the blacktop 2.0 off you!
stu
Standard ford injection system.
Thats a 2.0l pre pats ecu + cut down wiring loom + Maf + 2 throtle bodies (one modified to fit an escort manifold + Air temp sensor + 2 sets of
injectors with fuel rail ( side fed and end fed).+ Mondeo manifold + Ford injection Book.
Basicly this will run a standard 2.0l engine in a kitcar or say a 2.0l Fiesta conversion. No Pats. just a case of conecting the lives and earths and a
couple of relays for fuel pump and fan needs Lambada sensor in exhaust to run closed loop ............... £75
Tell me more im interested. Is it the plastic manifold type
yep plastic manifold but its for a 2.0l I think you said yours is 1.8. It would probaly over fuel it.
hi warren does the panhard rod have any bushes and brackets?
cheers
james
James you dont want much do ya
Nope it needs the bush one end and a m12 rose joint on the other.
thats fine mate, i'l take is please
can i pop over one night later on in the week?
cheers
james
Cheers for the link... this sounds like what i need. is there a discount if i buy both The engine and gearbox
Hi mate is the gearbox still up for sale?? where are you ??
daz161272@yahoo.co.uk
Cheers