Board logo

R1 engined locost
RonaldK - 3/7/10 at 04:25 PM

hi all,

just purchased a super sever with R1 2001 R1 engine. Car is drivable and quite fast but it requires some mods and I need some advice on where to get the stuff needed.

- Exhaust muffler is badly welded, might want to replace the complete exhaust + manifold. can this be ordered online somewhere and is it a simple bolt on job ?

- R1 dashboard, the neelde goes to 7, then back to 2, to zero. I assume these are error codes, can someone point me in the right direction

- R1 engine, it uses the stock airfilter atm, would like to replace this with something smaller, can this be ordered online and do the carburators need rejetting when the filter is replaced ?

Apologies for al the questions, hope you can help.....

thanks,


big_l - 3/7/10 at 08:01 PM

Carbs will need altering if you fit a filter mate I have done this to mine so I can tell you how !!

Mk do a good manifold or gbs who made mine mnr can also do awsome silences !!!


multanen - 4/7/10 at 03:21 PM

7k RPM code indicates missing or broken EXUP.

There should be be actual EXUP-servo in the car or "EXUP replacement module". Otherwise engine won't work well.


RonaldK - 4/7/10 at 05:46 PM

I'll post some pictures of the engine bay. think the servo is there but will check.
big_I, ill send u a pm for advise.

thx sofar.