Peteff
|
posted on 15/6/09 at 04:14 PM |
|
|
Erfi 170 mig.
£230 for the machine and the spare 15kg wire. No gas bottle (might have an old CO2 reg though) It will weld 20g comfortably and will go up to 6mm
(possibly more). It has a euro torch and the feed mechanism is excellent with the 0.8 wire I use with it.
[Edited on 15/6/09 by Peteff]
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
flak monkey
|
posted on 15/6/09 at 04:18 PM |
|
|
Nice, if only I had the money
Excellent bit of kit with a proper feed mechanism, makes all the difference to your welds!
Sera
http://www.motosera.com
|
|
tomprescott
|
posted on 15/6/09 at 04:25 PM |
|
|
Comparing that feed with my cheapo clarke one I know that yours is worth the money - shame I haven't got any!
|
|
Peteff
|
posted on 15/6/09 at 04:26 PM |
|
|
Your dad would lend you the cash, or convince him that he needs one.Use your initiative there man
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
blakep82
|
posted on 15/6/09 at 05:37 PM |
|
|
not for me, but worth mentioning what power supply it uses.
i'm guessing its not a normal 13amp plug?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
Peteff
|
posted on 15/6/09 at 07:41 PM |
|
|
Guess again, it runs quite happily from a 13amp supply otherwise I would have said 3 phase which I assume most users don't have
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
Peteff
|
posted on 17/6/09 at 06:51 PM |
|
|
Sold to a gentleman in a Land Rover Discovery (from another forum)
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|