zetec mike
|
| posted on 25/8/09 at 10:22 PM |
|
|
1.8 Duratec bits
I've got a 1.8 Duratec in my workshop taking up space. Most parts except sump available if any one needs any bits ?
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
omega0684
|
| posted on 26/8/09 at 08:31 AM |
|
|
is it working order??
|
|
|
zetec mike
|
| posted on 26/8/09 at 10:31 PM |
|
|
It was swapped as is was noisy on the top end. Thought I'd ask if anyone needed any bits.
|
|
|
goaty
|
| posted on 29/8/09 at 07:51 AM |
|
|
need a flywheel if its not the dual mass type if poss please
|
|
|
zetec mike
|
| posted on 29/8/09 at 10:36 PM |
|
|
I cant remember, I'll check it tomorrow and let u know.
|
|
|
goaty
|
| posted on 30/8/09 at 08:39 AM |
|
|
thank you
|
|
|
Stuart_B
|
| posted on 30/8/09 at 10:13 AM |
|
|
have you got the starter motor and ht leads and coil pack, if you have it and i will fit a 2.0?
and if it is a single mass flywheel and goaty does not have it, let me know.
thanks
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
Stuart_B
|
| posted on 30/8/09 at 04:47 PM |
|
|
and the dipstick? please
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
flak monkey
|
| posted on 30/8/09 at 05:16 PM |
|
|
quote:
Originally posted by Stuart_B
have you got the starter motor and ht leads and coil pack, if you have it and i will fit a 2.0?
and if it is a single mass flywheel and goaty does not have it, let me know.
thanks
stuart
Starter, coil pack and leads will all fit the 2.0 
Sera
http://www.motosera.com
|
|
|
FASTdan
|
| posted on 1/9/09 at 10:24 AM |
|
|
what car is it from? I need the tensioner as found on mk3 focus' that goes where the power steering pump would be on the mondeo motors (ie the
top tensioner).
I'd also have the flywheel if single mass - but looks like I'm well beaten to that one lol.
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
zetec mike
|
| posted on 1/9/09 at 10:17 PM |
|
|
Its from a Mondeo, flywheel is a dual mass, not sure what tensioners are on it. I'll have a look.
|
|
|
.jpg)
