SBD Duratec Cylinderhead 270hp
I have a very well ported SBD cylinder head. I bought the engine off the Xoomspeed guys, they ran it in their westfield - here is the ad:
http://forum.wscc.co.uk/forum/index.php/topic/106468-ford-duratec-270bhp-with-ecu-injection-exhaust/
I ended up fitting a hi-port head with bigger valves, and still made the same power! so it's a good head.
It had some porosity in cylinder 4, so i got it welded as i used it on the road. It was in the top of the exhaust port. Didn't smoke after
that.
I can get more pics, especially of the fix too. but i'm not back in the UK until Thursday.
Has standard valves, all caps, have standard springs and retainers though i would advise using uprated ones.
Might have some shims, but not a full set.
£700ono
07851542682
[Edited on 25/9/16 by ian996]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|