furryeggs
|
posted on 13/1/17 at 03:56 PM |
|
|
FS. R6 Throttle body set up.
I have my R6 ITB set up for sale. These have been spaced with an ally fuel rail with fitting ready for AN fittings. The manifold plate was from DanST
and runners TIG welded by me, not perfectly but should be more than ok. They are angled at roughly 30 degrees so are a little steeper than usual, I
had alternator clearance issues, hence the steeper angle.
Inc trumpets, TPS and injector plugs with spare injectors (8 in total) and connector hoses.
There is a very slight bow on the plate from welding but with a thicker turbo gasket it pulls in when fitted to the head.
open to sensible offers...
[img] [/img]
![](http://locostbuilders.co.uk/upload/3trumpet.JPG)
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
furryeggs
|
posted on 15/1/17 at 06:37 PM |
|
|
Can be split from manifold if its not required.
|
|