daviep
|
| posted on 19/12/07 at 06:07 PM |
|
|
Stuff for Sale
Had a bit of a clear out in the garage at the weekend selling stuff which is surplus to requirement it's all on
EBAY but anybody here wants anything that hasn't been bid on make me an offer and
I'll take it off.
Quick List:
Diff (english axle) 4.125 Rebuilt
CWP as above 4.125
Set of 10" drum brake back plates (english axle)
ZZR 1100 C3 Clocks
ZZR 1100 handle bar switches
ZZR 1100 loom
ZZR 1100 Starter& Alternator
Strut to fit Polo
Lister Petter engine
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
caber
|
| posted on 19/12/07 at 08:09 PM |
|
|
Lister Petter Engine? What is this off? does it work or is it at least complete? Can you post a photo I may be interested in this
Oh and the backplates if they fit a Capri rear loading axle!
Caber
|
|
|
daviep
|
| posted on 19/12/07 at 09:34 PM |
|
|
Hi Caber,
The engine came complete with a stick welder unit. I bought it intending to replace the DC generator with a 3 phase alternator.
When I got it it was running but was blowing from one of the head gaskets. I stripped it to replace the head gasket how ever I have now been given a
new Kubota which is now going on the alternator.
Suspect the head gasket blew because the cowling for ducting cooling air from the fan is missing. Never to keen to keep things simple I decided to pop
the barrels off while I had the heads off and give the engine a good clean. However I broke one of the scraper rings when I was putting the barrells
back on.
So it doesn't run at the moment needs 1 piston ring and a pair of head gaskets (I was going to make them out of a piece of copper which you can
have if you want it).
Had I been able to get it going again FOC I would have "found" a use for it but I'm not wasting any more time sorting something I
don't need.
Link to
EBAY advert.
Don't know if the backplates will fit but your welcome to try them if you want.
Cheers
Davie
|
|
|
caber
|
| posted on 19/12/07 at 10:21 PM |
|
|
I was thinking the Petter might work for a boat but I think it is too small if it was for a welder
I need to research the backplates a bit more will get back to you ASAP!
Ta
Caber
|
|
|
02GF74
|
| posted on 20/12/07 at 09:56 AM |
|
|
^^^^ surely depends how big the boat is too and how fast you want said boat to go?
|
|
|
