SPYDER
|
posted on 14/6/20 at 03:07 PM |
|
|
FS. Set of RS 7 spoke alloys 7 x 13 with free slicks!£200
Set of four RS 7 spoke Capri alloys. 13 x 7 inch. 108 x 4 PCD ET5. Backspace is 107mm. I had these used ACB0 slicks mounted to these rims many moons
ago and haven't had the balls to use them. My Phoenix is fast enough for me on ACB10s, thankyou very much. The tyres are part worn and came in a
job lot with some others. Fronts are 6/21-13, rears are 7/22-13. They have been stored in the dark but I can't really vouch for their
suitability for use. That's up to you. One of the fronts has some fine lines across the tread but they don't look deep to me. Basically,
the tyres are a free gift to the buyer of the wheels. They are fully balanced and even have dustcaps but no nuts. I am near M1 J27
![](http://www.locostbuilders.co.uk/gallery/awef.JPG)
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
bi22le
|
posted on 14/6/20 at 08:45 PM |
|
|
Im pretty keen on these but am nearly 3 hours away in DA1 (J2 M25)
If I buy them, could you hold them until I can get up to you?
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
SPYDER
|
posted on 14/6/20 at 09:17 PM |
|
|
^^^^ U2U sent.
|
|
SPYDER
|
posted on 14/6/20 at 10:21 PM |
|
|
To give an idea of how they fit under Phoenix bodywork...
This was the only time the slicks were ever put on the car.
|
|
bi22le
|
posted on 15/6/20 at 09:29 PM |
|
|
I have checked the ET for my Striker and these are going to stick out too far.
I have U2U SPYDER regarding this so this is a bump for him and to the forum that these are still up for grabs.
Good luck with the sale.
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
SPYDER
|
posted on 17/6/20 at 08:05 AM |
|
|
Let's get these sold. £150
|
|
SPYDER
|
posted on 21/6/20 at 10:30 AM |
|
|
I'll take offers on these, as long as you offer £125
|
|
bi22le
|
posted on 21/6/20 at 10:49 AM |
|
|
Have you got these advertised elsewhere? These will go for more, I recon, on a classic ford forum. Or eBay even. Starting at £125 I would be shocked
if these don't sell.
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
SPYDER
|
posted on 21/6/20 at 11:08 AM |
|
|
They're on a FB kit car group and on PH as well as FB general marketplace. I thought they would sell at £200! They'd be spot on for Santa
Pod or for a trackday kit if you have bigger balls than I have. Maybe people just aren't buying at the moment.
I've got a set of GSXR throttle bodies for sale cheap too with a similar lack of interest. Normally they would sell quickly.
|
|
Bunje
|
posted on 21/6/20 at 04:59 PM |
|
|
Do you know how heavy they are?
|
|
SPYDER
|
posted on 21/6/20 at 05:29 PM |
|
|
quote: Originally posted by Bunje
Do you know how heavy they are?
They rims are about 6.9 kgs each, or did you mean the total weight of all four including tyres?
|
|
SPYDER
|
posted on 22/6/20 at 08:40 AM |
|
|
Deposit taken.
|
|