Sandman
|
 posted on 21/3/10 at 02:40 PM |
|
|
Oil cooler
Hi all, new to the forum, saying hello, had my indy blade for a couple of years. Thinking of fitting a sandwich plate between filter and housing (from
demon tweeks) i think its an M20 fitting? and wondered if any one else had fitted one. Also wheres best to place the oil cooler and is blade oil pump
up to the job? Any help would be appreciated.
|
|
|
|
|
Jon Ison
|
| posted on 21/3/10 at 03:32 PM |
|
|
Doesn't the blade already have a oil to water cooler already fitted ?
I know my 893 did, never had any oil temp problems.
Oh, and welcome btw.
|
|
|
TimC
|
| posted on 22/3/10 at 01:41 PM |
|
|
Most of the RGB crowd use an oil-air cooler on their Fireblades.
|
|
|
Scott W
|
| posted on 22/3/10 at 03:24 PM |
|
|
I'll be watching this thread then as this is something I was looking to get for my car as well. We suffered with high oil temps on a trackday in
November and we're going back to the same place in the summer so I need to get something sorted by then.
|
|
|
Sandman
|
| posted on 22/3/10 at 03:39 PM |
|
|
Yes the blade has got an oil cooler fitted already but im looking to retain that and fit a oil to air system to help keep things the right side of
cool.
Beer is to expensive, drink petrol instead.
|
|
|
