prawnabie
|
| posted on 28/4/10 at 11:04 AM |
|
|
Anybody intrested in R/C Nitro planes??
Hi Guys
I bought a nitro powered R/C plane a couple of years ago with the intention of rebuilding it and moving from electric to nitro. Needless to say it has
sat gathering dust and I still fly electric! I will be selling it soon if anyone is interested?
it is the same as this one
http://www.hyperion.hk/preview/hp-mustang.htm
It is a hyperion P51D mustang with an OSF .40 engine partially plumbed in with filter and tank. It also has servos and control rods fitted for the
retracts, rudder/tailwheel/ elevators and alierons. The RX is fitted to and it also comes with a Skyports 6 TX
Most of the wiring is fitted are there are two batteries, one for the retracts and one for the TX
It is a fibreglass fuselage with ply and skinned wings (1.2m wingspan). I have fuel, a starter and a box of spares - glowplugs, servo horns, props etc
included in the sale.
Now for the bad points.
One of the wings is damaged on the corner and will need repairing and a bit of reskinning. There is no throttle servo so this will need to be fitted.
The nose/engine cover is a bit bashed about and has been cut so you dont need to take the prop off to fit it.
I will put some photos up later.
I would like £100 for everything!
Cheers
Shaun
[Edited on 28/4/10 by prawnabie]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
big-vee-twin
|
| posted on 28/4/10 at 11:37 AM |
|
|
I just been told my a college who is an enthusiast it would be best to advertise on the BFMA web site?
Hope that helps you sell
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
dhutch
|
| posted on 28/4/10 at 05:57 PM |
|
|
Not really planes, but im spent a long time nobbing about with cars (elec and nitro. 12th, 10th and 8th scale)
I also have a nearly new raptor30 i was given as a christmas present (cast off from my cousin) which i keep meaning to learn to fly.
Daniel
|
|
|
