NS Dev
|
| posted on 22/5/10 at 09:29 PM |
|
|
SIP 3 hp 14cfm compressor
Selling my two compressors to upgrade to one REALLY big one. I currently have this one and a 43 cfm Hydrovane, selling both
This one is a single phase, 240v, twin cylinder, SIP 3hp one with cast iron barrel. It has a 150 litre tank
It's not had a hard life, leaks no oil, gives very clean air, and being a big belt drive thing is "relatively" quiet.
After £250 but open to sensible offers. Comes with one filter-regulator unit on top of the tank.
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
NS Dev
|
| posted on 23/5/10 at 08:41 PM |
|
|
bttt this will go on ebay later in the week
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
NS Dev
|
| posted on 27/5/10 at 03:08 PM |
|
|
bttt now on ebay,
hydrovane now sold for £650
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
coozer
|
| posted on 27/5/10 at 03:21 PM |
|
|
Linky dinky dooo???
1972 V8 Jago
1980 Z750
|
|
|
NS Dev
|
| posted on 27/5/10 at 03:32 PM |
|
|
here ya go:
my compressor!
its a goodun, really good if you're stuck with single phase. We use it as a painting compressor only (the hydrovane was the main workshop tools
compressor) and with a single, good filter regulator we never get ANY oil or water issues!
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
