UncleFista
|
posted on 25/5/12 at 02:37 PM |
|
|
Cheap mesh for nosecones.
I was put onto this on another forum.
Ripspeed (what I reckon must be stainless) diamond mesh down from £30 to £10, enough to do 2, or enough to cock one up and still have enough to get it
right
Very tough to cut, and according to others who've used it it doesn't rust, even on the cut ends.
Link to mesh at Halfords
If that doesn't work, search the Halfords site for "Cat code: 379859-0"
Reserve to collect and it's £10 instead of £30 in store.
Tony Bond / UncleFista
Love is like a snowmobile, speeding across the frozen tundra.
Which suddenly flips, pinning you underneath.
At night the ice-weasels come...
|
|
|
maccmike
|
posted on 25/5/12 at 03:09 PM |
|
|
good shout
|
|
Bluemoon
|
posted on 25/5/12 at 03:21 PM |
|
|
According the Halford's site it's coated steel?? Time will tell!
|
|
UncleFista
|
posted on 25/5/12 at 03:26 PM |
|
|
quote: Originally posted by Bluemoon
According the Halford's site it's coated steel?? Time will tell!
Yeah, I saw that and assumed they knew what they were talking about until I tried to cut it.
It's very hard, and others have said it doesn't rust.
As you say, time will tell
Tony Bond / UncleFista
Love is like a snowmobile, speeding across the frozen tundra.
Which suddenly flips, pinning you underneath.
At night the ice-weasels come...
|
|
Ben_Copeland
|
posted on 25/5/12 at 05:12 PM |
|
|
Reserved online but they don't have any at my local shop when I went to pick up. Useless online reserver !!!
Anyone want to send me some ?
[Edited on 25/5/12 by Ben_Copeland]
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
Mr C
|
posted on 25/5/12 at 06:09 PM |
|
|
quote: Originally posted by Ben_Copeland
Reserved online but they don't have any at my local shop when I went to pick up. Unless online reserver !!!
Anyone want to send me some ?
You can buy online and the mesh will be sent to your local store on monday.
Girl walks into a bar and asks for a double entendre, so the barman gave her one
|
|
sdh2903
|
posted on 25/5/12 at 06:39 PM |
|
|
They are a tenner instore too, just picked one up.
|
|
Ben_Copeland
|
posted on 25/5/12 at 08:02 PM |
|
|
quote: Originally posted by Mr C
quote: Originally posted by Ben_Copeland
Reserved online but they don't have any at my local shop when I went to pick up. Unless online reserver !!!
Anyone want to send me some ?
You can buy online and the mesh will be sent to your local store on monday.
No you cant, as they are out of stock online
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
adithorp
|
posted on 25/5/12 at 09:09 PM |
|
|
I've had that on mine for 4 years and it's still like new.
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
Mr C
|
posted on 26/5/12 at 08:37 AM |
|
|
quote: Originally posted by Ben_Copeland
quote: Originally posted by Mr C
quote: Originally posted by Ben_Copeland
Reserved online but they don't have any at my local shop when I went to pick up. Unless online reserver !!!
Anyone want to send me some ?
You can buy online and the mesh will be sent to your local store on monday.
No you cant, as they are out of stock online
Not sure what you are doing Ben, This morning I've just ordered two for collection Monday from the Maidstone store. I checked that this service
is available to the Margate store, which it is.
Girl walks into a bar and asks for a double entendre, so the barman gave her one
|
|
Ben_Copeland
|
posted on 26/5/12 at 05:51 PM |
|
|
They are out of stock, they just dont have anyone on at the weekend to email saying they are out of stock as its been discontinued. Spoke to head
office and they confirmed theres none left.
You can order it online for collection etc, but they dont actually have any.
quote: Originally posted by Mr C
quote: Originally posted by Ben_Copeland
quote: Originally posted by Mr C
quote: Originally posted by Ben_Copeland
Reserved online but they don't have any at my local shop when I went to pick up. Unless online reserver !!!
Anyone want to send me some ?
You can buy online and the mesh will be sent to your local store on monday.
No you cant, as they are out of stock online
Not sure what you are doing Ben, This morning I've just ordered two for collection Monday from the Maidstone store. I checked that this service
is available to the Margate store, which it is.
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
SteveWallace
|
posted on 30/5/12 at 09:25 PM |
|
|
Same experience with me. Ordered on line and apparently in stock. Took credit card payment then got another e-mail a couple of days later saying
that it was not actually in stock and that they were going to refund my payment (but presumably not the cost of the petrol to go and get it when I got
an e-mail between the two saying that it was ready for collection
What a way to run a business. I did see a good set of rachet spanners whilst I was there but I refused to buy them and will not be going back again
unless its a last resort
|
|
HowardB
|
posted on 30/5/12 at 09:43 PM |
|
|
must have been really lucky as I got mine ok, reserve for collection, email saying it was there, would be held 24 hours, and I collected it at hour
30, still waiting for me.
nice stuff too.
Howard
Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)
|
|
Ben_Copeland
|
posted on 30/5/12 at 09:53 PM |
|
|
quote: Originally posted by SteveWallace
Same experience with me. Ordered on line and apparently in stock. Took credit card payment then got another e-mail a couple of days later saying
that it was not actually in stock and that they were going to refund my payment (but presumably not the cost of the petrol to go and get it when I got
an e-mail between the two saying that it was ready for collection
What a way to run a business. I did see a good set of rachet spanners whilst I was there but I refused to buy them and will not be going back again
unless its a last resort
I complained instore, so they gave me a different style of mesh for same price as this
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
Macbeast
|
posted on 31/5/12 at 05:02 AM |
|
|
I have a sheet of this stuff which I didn't use. £5.00 + postage or collect North London.
I'm addicted to brake fluid, but I can stop anytime.
|
|
dunk3
|
posted on 31/5/12 at 06:12 AM |
|
|
Just reserved mine from the pontefract store , got until friday to pick it up , they better have it in stock when i get there
|
|
monkeyarms
|
posted on 1/6/12 at 08:36 AM |
|
|
I ordered a sheet on tuesday, and by today (Friday) it hasnt arrived.
After a lengthy phone call the £10 price was to clear old obsolete stock.
Bugger, could have done with some for this weekend.
|
|
bob
|
posted on 1/6/12 at 04:22 PM |
|
|
I used the same stuff on mine, its been on the cone since i put the zetec in and changed the rad (polo) so thats 5 years, still in good shape.
I got lucky and pulled a sheet of it out of the bargain bucket for £2, it was bent on one corner and the packet had been opened so bargain.
|
|
dunk3
|
posted on 1/6/12 at 05:03 PM |
|
|
Picked up my mesh from halfords this afternoon , looks good quality .
|
|
main82000
|
posted on 1/6/12 at 05:11 PM |
|
|
quote: Originally posted by Macbeast
I have a sheet of this stuff which I didn't use. £5.00 + postage or collect North London.
ill have that from you if you still have it u2u sent
i also got the out of stock email after a couple of days into the order
|
|