J222jra
|
posted on 3/5/13 at 05:15 PM |
|
|
Wilwood brake upgrade
Looking at upgrading the standard mk3 cortina front brake callers guys for a nice set of Wilwoods. Now I've read somewhere that adaptors are
needed is this true?
I'm looking on rally design and they sell2 complete kits shown in the links below,
http://www.rallydesign.co.uk/product_info.php?products_id=10507&osCsid=8c1hnpctpllnsrtdvgvgr0fmn2
http://www.rallydesign.co.uk/product_info.php?products_id=3934
I'm guessing he difference between the 2 kits is that one uses a solid disc and one uses a vented one?
Do they both give good results?
Any help and advice is much appreciated.
|
|
|
J222jra
|
posted on 3/5/13 at 08:36 PM |
|
|
Just noticed the first link isnt working....lets try again haha
http://www.rallydesign.co.uk/product_info.php?products_id=10507
|
|
theduck
|
posted on 3/5/13 at 09:23 PM |
|
|
Two different callipers. First are powerlite second midilight.
|
|
J222jra
|
posted on 3/5/13 at 09:30 PM |
|
|
Do you know if theyre a direct replacement for the standard cortina calipers?
|
|
theduck
|
posted on 3/5/13 at 09:36 PM |
|
|
Both kits are described as being cortina/westfield firmest so will include the correct bracketry.
|
|
rusty nuts
|
posted on 4/5/13 at 07:02 AM |
|
|
If your going to Stoneleigh they normally have a stand at the show and will give you any advice you need and possibly have brake kits etc on offer
|
|
J222jra
|
posted on 4/5/13 at 09:46 AM |
|
|
Thanks for the input guys!!!
Does anyone know the thread size for the brake pipes that wilwood use?
|
|