Steelman
|
| posted on 8/5/16 at 07:16 PM |
|
|
How close can you have a silencer next to the bodywork
[Edited on 8/5/16 by Steelman]
|
|
|
|
|
ian locostzx9rc2
|
| posted on 8/5/16 at 07:42 PM |
|
|
About 50mm is ok
|
|
|
Dick
|
| posted on 8/5/16 at 08:13 PM |
|
|
It depends how hot it get in truth mine is about 20mm away and i dont get any problems my car has alloy sides that are painted
|
|
|
steve m
|
| posted on 8/5/16 at 08:25 PM |
|
|
I take it your body work is plastic ?
As I do noy have an issue with mine
steve
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
|
|
|
Slimy38
|
| posted on 8/5/16 at 08:44 PM |
|
|
Interesting topic. I was going to have mine 'inside' the bodywork, but wasn't sure whether the heat would just mess things up. At
the very least I was going to cover the inside of the GRP with a heat shield or similar.
I should say I'm going for a full body rather than a seven design, so when I mean inside the bodywork it's still outside the cockpit. But
it's still going to be tight, even a shaped exhaust is going to be an inch or so at most.
|
|
|
