StevieB
|
| posted on 23/10/07 at 02:29 PM |
|
|
Anyone have access to Mill/Lathe and can weld ali?
As above really - does anyone own or have access to a mill/lathe and can weld ali in the Yorkish area?
I want to get the centre of my sierra wheel turned down and welded to either an ali plate or the ali adapter plate for my Westy steering wheel.
Beer tokens awaiting!
|
|
|
|
|
Gav
|
| posted on 23/10/07 at 05:20 PM |
|
|
Ive got a lathe and AC Tig set but im not near York....
|
|
|
Wadders
|
| posted on 23/10/07 at 06:09 PM |
|
|
You have u2u
]Originally posted by StevieB
As above really - does anyone own or have access to a mill/lathe and can weld ali in the Yorkish area?
I want to get the centre of my sierra wheel turned down and welded to either an ali plate or the ali adapter plate for my Westy steering wheel.
Beer tokens awaiting!
|
|
|
StevieB
|
| posted on 23/10/07 at 07:00 PM |
|
|
Cheers Wadders!
This is what I'd like to do (roughly):
|
|
|
bpgoa
|
| posted on 23/10/07 at 07:20 PM |
|
|
you might want to do the nice helpers a favour and cut out the big lump of steel cast into the sierra center
On and On the River flows... We the Undertow
|
|
|
StevieB
|
| posted on 23/10/07 at 08:00 PM |
|
|
I wasn't aware of a lump of steel in there.
Naturally I'd get everything as far as I could before any machining (without going too far and making a complete @rse of it, of course!)
|
|
|
Mark Allanson
|
| posted on 23/10/07 at 08:13 PM |
|
|
The steel is the supports for the spokes of the wheel, not cast though.
I made this up from the sierra wheel boss (removed) and fabricated adaptor to mate upto my mountney wheel
 
Rescued attachment Boss.jpg
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
