cidersurfer
|
| posted on 21/1/08 at 09:15 AM |
|
|
Trailer For Sale, Cheap
I've had this trailer for just over a year. I bought it off eBay and it will be going back on if nobody here wants it. I have now bought a
covered one, so this one is now surplus to requirements. It's not a branded one but it tows well being used on approx ten occasions last year
towing the Westy. The furthest it went was from Cornwall to Hullavington, a round trip of 330miles with the car without any bother. 
The overall size is; length 4.67m, width 2.25m
The bed size; length 3.67, width 1.8m.
It takes a wide track no problem.
It has good tyres (Avon), it is braked, but like all these things, I haven't checked them or adjusted them recently and so I suggest that the
buyer does. It has a light board that works and it has a winch.
The loading ramps are a little short for a low car like a Westy but I've got some timber extensions (see photo) that are included.
Points for improvement. If I was keeping it I would improve the jockey wheel mount (as it flexes a little), check the brakes over and add some trailer
steadies to the rear as at the moment it needs to be hooked onto the car or have a jack under the rear crossmember to stop it tilting whilst driving
on and off. Though this is never a problem as long as you remember! :bangshead:
I'm looking for £500 and am willing to help with delivery for the cost of diesel as it is in Cornwall. Photos follow;
Image deleted by owner
Image deleted by owner
Image deleted by owner
Image deleted by owner
[img][/img]
shimming solid lifters is a job for a friend...
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
tegwin
|
| posted on 21/1/08 at 10:33 AM |
|
|
Oooh..Oohh,...(Jumps up and down like a three year old)..
You have U2U!
|
|
|
cidersurfer
|
| posted on 21/1/08 at 11:37 AM |
|
|
U2U too
shimming solid lifters is a job for a friend...
|
|
|
cidersurfer
|
| posted on 21/1/08 at 04:50 PM |
|
|
Still for sale...
shimming solid lifters is a job for a friend...
|
|
|
cidersurfer
|
| posted on 22/1/08 at 10:53 AM |
|
|
Forgot to mention, it has tie down points and wheel chocks too...
shimming solid lifters is a job for a friend...
|
|
|
cidersurfer
|
| posted on 26/1/08 at 12:01 PM |
|
|
**** SOLD ****
shimming solid lifters is a job for a friend...
|
|
|
