Mr Whippy
|
| posted on 23/6/08 at 12:43 PM |
|
|
Two 7 roadster seats for sale
£100 for both seats, in black, good condition, only used briefly in the bluey Note:- they do not have the upper harness holes but I do have the
plastic things for doing them just not had the courage to do fit them,  just need a bit of care and some hard foam inserted round the hole first,
someone handy could do it easily.
Will post in the UK
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
madrallysport
|
| posted on 23/6/08 at 12:53 PM |
|
|
Any pictures of the seats
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
|
tegwin
|
| posted on 23/6/08 at 12:54 PM |
|
|
Are these the really narrow ones? Do you have any pics?
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
Mr Whippy
|
| posted on 23/6/08 at 01:00 PM |
|
|
sorry there back at the old house but it these ones (everything is black), without the top harness holes. Very narrow fit in a 7 just fine. They have
that Cobra name stiched into the top too.
I have the plastic square hole things, they just need fitting.
[Edited on 23/6/08 by Mr Whippy]
|
|
|
swanny
|
| posted on 23/6/08 at 01:55 PM |
|
|
seats
I'll have em!
will pm you.
Paul
|
|
|
chris_smith
|
| posted on 23/6/08 at 06:02 PM |
|
|
second dibs if swanny pulls out please
|
|
|
Russell
|
| posted on 23/6/08 at 07:12 PM |
|
|
I took mine to the Cobra factory in Telford and they fitted the proper harness holes for a modest fee. Very helpful bunch of people! I
wouldn't have had the nerve to take a knife to the seats like they did and they steamed the wrinkles out afterwards (that's the wrinkles
out of the seats, not me - I'm beyond economic repair).
You need to feel the seat backs to see if the support metalwork is already in there, which it probably is unless they are very early seats.
I'm a bilingual illiterate. I can't read in two languages.
|
|
|
