Board logo

Corner weight - suspension set up and check
lightspear27 - 18/9/06 at 08:01 AM

Hi, quite the same question as the one under but regarding suspension check and set up, corner weighting, ...

... where in the south between Dover and London?

What price should I expect?

Even better ... do you know of a place where they do rolling road session + corner weighgting / suspension set up?

Thanks,

Stefano


procomp - 18/9/06 at 08:16 AM

Hi dont personaly no of any one in that area but there must be someone.

Price wise should be looking at about £200 for a full setup inc all the cambers checked and set- tracking f+r set depending on irs or live axle- castor checked and adjusted if adjusable- ride hieghts set to suit what use and what the car requires- corner weighted- and if they have the facility all dampers removed and checked on the dyno.

cheers matt

Edit to say that rolling road costs would be on top of that.

[Edited on 18/9/06 by procomp]


RazMan - 18/9/06 at 10:42 AM

I was charged £180 for the geometry setup and about £40 for corner weighting.


lightspear27 - 18/9/06 at 11:02 AM

where in the south can I go for a complete suspension set up?


RazMan - 18/9/06 at 11:13 AM

Mine was done at Aeon Sportscars They are near Maidstone if that is any good for you. Ask for John Hewat

[Edited on 18-9-06 by RazMan]


lightspear27 - 18/9/06 at 11:32 AM

Hi Raz, do you think they accept to set up the suspension on a "non-aeon" car?


RazMan - 18/9/06 at 11:41 AM

No problem - when I was getting mine done he was just finishing a Fisher Fury. He has some very good lazer equipment and is a knowledgable chap so I am confident he will sort you out.