Board logo

Sierra hubs/drive shaft ends
chrisg - 7/11/08 at 06:33 PM

I still need the outer ends of a bolt on driveshaft and the actual hub that the wheels bolt to. I've got the bit of the hub that bolts to the upright.

Cheers

Chris


chrisg - 8/11/08 at 05:38 PM

bumpity bump!


chrisg - 9/11/08 at 08:01 PM

Tum te tum...


Triton - 10/11/08 at 05:31 PM

Car park at midnight job then Chris...


chrisg - 10/11/08 at 06:17 PM

Looks like it!

Anyone lend me a 41mm socket?

Cheers

Chris


chrisg - 13/11/08 at 11:45 AM

LOOK

I'm a reasonable man, I've vowed never to kill another living thing (unless it iritates me in some way) but I need these bits.

No more mr nice guy, If someone doesn't sell me these bits I'm going to start shooting the hostages.

Don't think I won't do it - I'M A DESPERATE MAN.

You don't need that spare set under the bench, you'll never bust the ones on your car!

Speaking of your car, what about the set on your back axle? Think of the warm fuzzy feel it would give you to know that you had helped a fellow human being!

In short Jesus wants you to give up your hubs so that another might live, and you don't want to p*ss off Jesus. I know you've been under the weather recently what if it's serious and you have to face St Peter knowing that you were selfish with the suspension components?

Give me your hubs or you'll burn in Hades for eternity. So think on.

Cheers

Chris


SPYDER - 15/11/08 at 07:54 PM

You can free the hostages Chris.
Possibly.
I have TWO of the hubs you require.
Well, more than two actually.
I definately have a pair of used ones you can have for free.
I think I have some new, boxed ones kicking around. You know. Spare ones, under the bench. The ones you'll never need.
Until you sell them!
I'll have to look.
I am 5 minutes from M1 J27. Half an hour from Sheffield.
Interested.
You'd better be after the stink you've kicked up!
Oh flip!! Jesus is coming. I'd better look busy!
Geoff.
01623 400923


chrisg - 17/11/08 at 01:08 PM

Thanks Geoff, I'll call you later.

Cheers

Chris