I need the one in the picture with the red and yellow wires I only need the male part as the female plug is ok.
Any one got one, beer tokens at the ready.
Thasank you.

I'll have a look

I should have a couple - if its the same on an EFI granada

what length of wire would you like ?

Longer the better thank you

why not cut the plug off and solder straight through..

you can always remove the little plug from the dizzy if you need to rake the dizzy out

I just used spade connectors straight onto the terminals. Also used small cable tie to secure the wires.

I've had a good look at all my ones now
I have got bosch distributors, but they must all be a later type than yours as they are nothing like that pic (mine have 3 wires and a different plug)

so sorry about that - I guess you cut off the old plug and fit a new one of any type you like

[Edited on 15/11/08 by mcerd1]

Thanks for looking I am still after one if anyone can help
Thanks