Board logo

WTD: 1800 Zetec Silver top
andylancaster3000 - 30/11/08 at 07:29 PM

Hi all,

I'm after an 1800 silver top zetec and was wondering if anyone has got one lying about that is not being used? I've bought a fresh bottom end; including new pumps, rings and bearings etc but need most of the rest of the engine bits, predomentaly a complete head! The important point is that it needs to have either 928M or 958M stamped on the head (above the exhaust manifold).

I'm also interested in components such as a twin DCOE inlet manifold, RWD suitable sumps and adjustable pullies etc.

Anything considered and preferbly located nr Fleet-Hants, Loughborough or somewhere between the two!

Cheers,
Andy

coozer - 30/11/08 at 07:50 PM

I have one here that is 1994 so no cat Just taken it out of my car to replace with a ST170.
Check my blog, its in excellent condition and with my ZX9R carbs gave 155bhp on the RR.

Fitted with 130 cams and a water rail, coil pack etc.

Looking for £200 as thats what I paid for it but will include a cambelt kit thats not been fitted.

Steve

Danozeman - 30/11/08 at 10:21 PM

I may have a zetec twin 40 manifold and twin 40's for sale soon.

DavidW - 3/12/08 at 10:19 PM

quote:
Originally posted by Danozeman
I may have a zetec twin 40 manifold and twin 40's for sale soon.


Pre August 1995 by any chance?

Peteff - 5/12/08 at 04:18 PM

I have one here near Chesterfield everything still on it. It's from a Fiesta XR2i you can have it for £40. It's got 928m on the head. 35 miles to here from Lugabaruga.