I need an air intake temp sensor and coolant temp sensor for my megasquirt....

Any one got some laying about?

Pennies waiting

David

Can't help you with the sensors, but I'm using the standard for water temp sensor on my MS install, and bought an air temp sensor from phil at ExtraEFI.

Cheers

Scott

PS. let me know how you get on with your MS install, I'm in the middle of mine atm.

i got air and water temp sensors from phil @ extra efi, cost me £40.

Hi Dave, mondeo inlet manifold temp sensor any good ? in Lynn next monday shopping, could meet.

Mike.

quote:

---

Originally posted by phoenix70
Can't help you with the sensors, but I'm using the standard for water temp sensor on my MS install, and bought an air temp sensor from phil at ExtraEFI.

Cheers

Scott

PS. let me know how you get on with your MS install, I'm in the middle of mine atm.

---

Rs component sell a bead type thermistor of the correct range to use without having to use easytherm, unfortunately I cant remember the part number at the moment though..I used one for the air temperature and used a bosch coolant sensor from a peugot for the water temp.The water one is a few degrees out but as it only controls warm up is not so important, the air temp needs to be as near as posible as it directly controls mixture at all running temperatures.
Paul.

I am going to use 2 of these

http://cgi.ebay.co.uk/Vauxhall-VECTRA-CALIBRA-TIGRA-WATER-TEMP-SENDER-NEW_W0QQitemZ370103612367QQihZ024QQcategoryZ10404QQcmdZViewItemQQ_trksidZp1742.m 153.l1262


A coolant temp sensor can be used as an air temp sensor but not the other way round.

Connector is the same as injector connector (I think)