Board logo

MIG thin gas tube
RichardK - 17/12/08 at 09:22 PM

Any ideas where I can get an extension from, done the usual google search thing but not coming up with the goods but I'm probably using the wrong search phrase. Anybody know where I can get an extension from if indeed they exist?

Its a SIP migmate 130

Cheers

Rich


jabs - 17/12/08 at 09:34 PM

do you mean like this

http://cgi.ebay.co.uk/Cebora-Snap-On-130-Mig-Torch-Gas-Pipe-4mm-x-3-5m_W0QQitemZ310063725693QQihZ021QQcategoryZ11774QQtcZphotoQQcmdZViewItemQQ_trksidZ p1742.m153.l1262


Rob3 - 17/12/08 at 09:37 PM

Its just 4mm nylon or similar pipe. Very commonly used in pneumatics, so some pipe and a 4mm straight connector will do it. All availiale from rs etc


RichardK - 17/12/08 at 09:40 PM

Thanks guys, I'll get to RS cheers as I'm not too far away

Rich


Litemoth - 18/12/08 at 11:20 AM

It sounds like a job for John Guest.
They are the Speedfit people.

Fill ya boots here:


http://www.johnguest.com/range_spec.asp?a=PIPM&rs=1&id=22#Metric Size Tube-to-tube Fittings