Hi

going to be megasquirting my crossflow soon

has anyone got a spare or unwanted crossflow crank pulley with trigger wheel fitted. thought id ask befor buying a new one.

thanks

Mark

If you can get hold of a crank pulley from a 1.8 cvh from a scrappy you should be able to make your own. The cvh has a ring on the pulley that can be removed and you should be able to weld it onto your crossflow pulley.

Stu

I used a wheel from trigger wheels , made up a spacer to fit into the steel crank pulley to which I doweled the trigger wheel when I was happy with the position . Helps to mount the sensor before positioning the T/W. Don't bother using a standard X flow pulley as they self destruct at high revs, use a steel one