LocostBuilders - powered by XMB

WTD: 2L fuel swirl pot base mount

tomgregory2000 - 17/1/10 at 09:38 AM

Hi everybody

Im after a swirl pot/tank
It has to be base mount with 2x8mm connectors for fuel in and return from the fuel rail. 6mm or 8mm connector on top for the overflow.
And it need to have a connector out to the fuel pump of at least 12mm.

Ive found one on ebay but i would much rather give my money to someone on here.
If i dont hear anything buy the end of the day im going to have to buy the one off ebay.

Tommy

MakeEverything - 17/1/10 at 11:51 AM

quote:
Originally posted by tomgregory2000
Hi everybody

Im after a swirl pot/tank
It has to be base mount with 2x8mm connectors for fuel in and return from the fuel rail. 6mm or 8mm connector on top for the overflow.
And it need to have a connector out to the fuel pump of at least 12mm.

Ive found one on ebay but i would much rather give my money to someone on here.
If i dont hear anything buy the end of the day im going to have to buy the one off ebay.

Tommy

Make one from an aluminium "SIGG" type bottle, drillit out, and epoxy some fittings into the bottom and top of it. or if you buy a stainless one, you can weld them in.

tomgregory2000 - 17/1/10 at 08:23 PM

CLOSED now