Does anyone have a sierra indicator switch hanging around - the one with the hazard button on top ?
Beer tokens waiting !

Remember there are 2 different types of indicator stalk depending on how your full beam/flash is wired. pin 15 indicates a mk1 stalk. You've also got 'with or without horn push' at the end on the mK1 setup.

Cheers

G

Do you have a part number , should be on the switch?

quote:

---

Originally posted by rusty nuts
Do you have a part number , should be on the switch?

---

There may be 2 types of hazard switch warning light lens , round or square?

quote:

---

Originally posted by rusty nuts
There may be 2 types of hazard switch warning light lens , round or square?

---

Not sure if the cowl will be interchangeable or if indeed the switches are for that matter without having to rewire them . If you can get the part number off the switch it will help . Lolocost or whoever they are now usually have a load in a bucket at Stoneleigh.

There are two numbers on the switch -
30924
85BG13B302 9119 01 G48 190

Any help ?

edit - and there is `pin 15' ?

[Edited on 1/5/10 by clairetoo]

As I posted earlier pin 15 means its a mk1 switch, its no good going by the shape of the hazard on the top as they done both shapes on the mk2 but as a rough rule of thumb square is mk1 and round mk2. Mk1 cowl and mk2 are different.

I had a right old time trying to find a mk1 switch, everyone had mk2 then as rustynuts has mentioned lolocost at a show had a whole plastic container of them! (with plugs)

[Edited on 1/5/10 by Mr G]