Board logo

Wanted - Ford Cortina brake reservoir & harness clip
Mr Whippy - 14/7/10 at 11:44 AM

Hi,

Lost two things and need replacements…

Needing a standard plastic brake reservoir bottle to fit my cortina master cylinder (with a cap would help but doesn’t need to have a level switch), IIRC the two bottom connector centers were 87mm apart, but don’t quote me on that as I forgot to write it down

And also need a harness clip for a 2 inch wide harness with a spring latch to go over a eye bolt, god knows where that disappeared too, looked everywhere I could think off

Right go to go, very super busy lately

U2u me if you can help out, cheers...byeeee


big_wasa - 14/7/10 at 12:35 PM

One of these ?




£3 on ebay just put in kitcar harness.


Mr Whippy - 14/7/10 at 07:31 PM

well done, did searches myself and never found any

cheers