Board logo

Wtd:38mm steel tube
MakeEverything - 20/7/10 at 01:37 PM

Does anyone have an offcut of 38mm tube that they could send me please? I could get a 1m length but i only need 150mm!!

[Edited on 20-7-10 by MakeEverything]

rayward - 20/7/10 at 02:15 PM

i might have some stainless if thats any good ?

Ray

scudderfish - 20/7/10 at 03:42 PM

That reminds me, I've still got that length of tube I borrowed from you to get my crank bolt out

MakeEverything - 20/7/10 at 06:15 PM

quote:
Originally posted by scudderfish
That reminds me, I've still got that length of tube I borrowed from you to get my crank bolt out


Lol, Thats ok Dave. As and when. I will probably use it, but i wont know what for until i need it! What diameter is it btw?

quote:
Originally posted by raywardi might have some stainless if thats any good ?


Anything will do, but ill be TIG welding it to Mild Steel. How much do you want and for how much?

scudderfish - 20/7/10 at 06:47 PM

The one you lent me is 38mm O/D but aluminium. I have some 34mm (1.25 inch) steel pipe now though if that is of any use?

MakeEverything - 20/7/10 at 07:28 PM

quote:
Originally posted by scudderfish
The one you lent me is 38mm O/D but aluminium. I have some 34mm (1.25 inch) steel pipe now though if that is of any use?


'Fraid not. The hole i need the pipe to cover (or extend!) is 37.5mm so i need 38mm. Its for the cooling system to change the direction of the water outlets from the block rather than use the cast ali ones which point the wrong way.

Thanks anyway

[Edited on 20-7-10 by MakeEverything]