Board logo

Sytec Hose Clips
m8kwr - 15/10/10 at 07:37 AM

Hi, I am looking for a Silver Sytec Hose clip, it is to go over an 18mm hose.

Demon Tweeks only sell a 10mm one, and ones on ebay are not silver.

Does anyone know where to get these from?

daviep - 15/10/10 at 08:53 AM

Is 18mm the ID or OD of the hose?

m8kwr - 15/10/10 at 09:02 AM

Outside Diameter - 18mm (or could be 17.5)s

Its just braided fuel hose.

daviep - 15/10/10 at 09:08 AM

Check HERE page 26. dash 8

Looks like only silver and blue are available in the larger sizes see HERE is the same.

Could try CBS but they are a bit pricey.

Davie

m8kwr - 15/10/10 at 09:19 AM

daviep many thanks for your help - cbs are really expensive are I require 18-20 of them

britishtrident - 15/10/10 at 11:15 AM

Having tried them in the past I never found them that satifactory in terms of both looks or function.


Another way to finish the hose is use heat shrink tubing over the cut end (shrink with a hair dryer) with a good quality fuel hose clamp over the top.