Board logo

Wanted - Used Set of XE Piston Rings
perksy - 31/10/10 at 07:52 PM

Looking for an Old set of used C20XE Piston Rings (standard size)

Part set would do aswell

For a little project in the garage

Thanks

Ben_Copeland - 31/10/10 at 07:55 PM

I have some i think... if i can get them off the pistons in one piece.

Got several sets of pistons in my "engine bits box" so should get some out of it!

perksy - 1/11/10 at 06:17 PM

Be good if you have Ben

Please let me know

Could get away with just having 1 piston ring for each piston if that helps

Cheers
Perksy

NS Dev - 2/11/10 at 02:26 PM

got a set of pistons with rings on if you can pick em up they are foc.

what are they for?

compressor?

Ben_Copeland - 2/11/10 at 02:40 PM

I'll have a look later and set them in an envolope.

perksy - 9/11/10 at 10:08 PM

Hi Ben any joy with the rings ?

perksy - 9/11/10 at 10:25 PM

quote:
Originally posted by NS Dev
got a set of pistons with rings on if you can pick em up they are foc.

what are they for?

compressor?




Thanks for the offer but just need the rings for a spare bottom end thats going to be stored

Like a dickhead i threw the old rings away by mistake

Ben_Copeland - 9/11/10 at 10:36 PM

Sorry mate, completely forgot... will dig out in the morning. Send me your address and i'll post out tomorrow

perksy - 10/11/10 at 06:59 PM

Thanks Ben

Have sent a U2U

Ben_Copeland - 11/11/10 at 08:44 PM

On their way mate. Should get early next week.

perksy - 12/11/10 at 05:25 PM

Thanks very much Ben

Much appreciated Mate