Board logo

welding service
femster87 - 3/11/10 at 09:15 PM

am after a welder near me to weld my zetec sump back together for me. I would appreciate any offers and would pay for the time. just let me know

thanks

austin man - 3/11/10 at 09:27 PM

is it the ally sump (silvertop)? Martin Keenan MK Engineering does a good job of thes. Done 2 for me and a mate hes base in rotherham

femster87 - 3/11/10 at 09:35 PM

no its the small bottom steel one.

austin man - 3/11/10 at 09:55 PM

a local garage will be able to do it if your struggling.

dilley - 3/11/10 at 10:01 PM

Take it to mrtin at mk engineering, He has done a load of work for me and I cannot recomend him enough.

Davey D - 3/11/10 at 11:47 PM

What needs welding? is it a flatpack sump that needs fully welding?

Im in grimsby, so not far away

femster87 - 4/11/10 at 08:29 AM

no mate its not a flat pack one, am just chopping the bottom of the original and rewelding a plate on

Davey D - 4/11/10 at 10:18 AM

quote:
Originally posted by femster87
no mate its not a flat pack one, am just chopping the bottom of the original and rewelding a plate on


Aaah piece of cake! i can do that for you. You could either pop it down to our workshop in Immingham ( bit closer) or bring it over to grimsby

Are you doing all the chopping of sump, and cutting of plate, or is that something that you need doing too:?

femster87 - 4/11/10 at 12:00 PM

hiya mate, i havent choped the sump, can you do that as well. my mrs works in stallinborough business park so immingham might be more convinient. can you let me know how much you would accept please. thanks