i have a slight leak from the cover plate on my oil pump and am after a part number or o ring for it.
cheers
chris

I just took the o ring out cleaned the groove, greased it up and re fitted it,

fine since

Steve

yes i have done that, i was just after one for future spares

Take the original to any bearing stockist or hydraulic parts people. They will be able to match it from the dia and gauge, they are all stock rings.

Just remember that they will swell if saturated by oil, so if it has been leaking its best to measure the dia of the groove to guarantee the right size.

[Edited on 29/12/10 by plentywahalla]

Whats the diameter and thickness? I might have one in a set i bought at Newark.