am after 4 x 5/16" hex head bolts and nylocs for steering shaft u/j. 1 3/4" long with 3/4" unthreaded. they are advertsed in cbs but dont appear on there web site. i have checked ebay and none fit this criteria. with 3/4" unthreaded. anywhere else to try?

have you tried namrick?

no mate. i also forgot to reply to you before. join s2ki forum for s2000 advice. quite a nice bunch really. although most of them dont like kit cars. one of them said that what i have done to an s2000 was an 'abortion' i told him politely that i rescued it from the breakers yard!

try thomas graham in kendal and if they cant help A T Engieering at garstang should have them. .m.

Thomas Graham in Carlisle should have them if you're going that way or if it's urgent, they have a branch at Egremont but I dont know what they carry.
We might even have them on the shelf in the store where I work too!

might try them mate. am on white lund in morecambe on saturday having prop shaft shortened so might have a browse around there

thomas graham have a shop on white lund as well but dont think they open saturday,AT's will deliver them to me on friday if they've got stock, give me a ring if you want me to get them .m.

you're a very helpful "young" man mate. if i dont see you soon, i will see you up at barbon in the not too distant future. possibly in thr mnr!

Silly question but cant you use m8 bolts theyre within a thou on dia?
unless the bit you are putting them in are threaded of course.
Ray