I know this is a long shot but I'm wondering if anyone would be willing knock me up a bracket.

It would need to be 150mm long x 40mm wide and anywhere between 5mm to 10mm thick, It's for holding a TDC sensor in place so has to be rigid.

Thanks in advance

[Edited on 27/1/11 by craig_007]

How quickly do you need it? I may be able to help.

Regards
Davie

No real rush at all.

Just thinking ahead really.

Would be much appreciated though.

what sort of thing did you have in mind ?

just a bit of shaped flat or bent & welded or machined billet or something else.....

Had a look in the garage today, I've got nice piece of ally 8mm thick which I can use, drop me a u2u or post the design and I'll let you know how long it'll take.

Davie

Hi thanks for that much appreciated.

I did manage to get a bit 10mm steel from a friend and hopefully that will do.

Thanks again all the same.

Craig

If you ever need material drop me a line, got loads of scrap lying about, also have a lathe and a mill if you need bits machined.

Davie