Board logo

diff
Rob E - 16/2/11 at 05:48 PM

long shot i know but i am after a lsd diff not to sure of ratio but will take what ever comes along , i also need the drive shafts ( i donty want much do i )
Cheers in advance

Rob


theduck - 16/2/11 at 05:55 PM

What car do you need one from??


snapper - 16/2/11 at 06:46 PM

What is your location?


nick205 - 16/2/11 at 07:06 PM

and getting the right ratio is probably more important than having and LSD.


motorcycle_mayhem - 16/2/11 at 08:57 PM

I may have a Freelander 3.21:1 (if you've got a BEC this is ideal), with Quaife ATB. It's come from a 3-year old car, only a few thousand miles, probably just run in. Also comes with driveshafts and flanges to fit Ford-based (Westfield) uprights. I've removed these, simply to change ratio (!).....

It's all going on the Westfield site soon, it won't be locost. It simply wont, check the westfield-sportscars.co.uk catalogue for an idea of the new cost.


Rob E - 17/2/11 at 03:34 PM

Sorry forgot to put what i need , its the sierra diff i need , i am running a duratec 2.0 st 170 and mt75 box ( i know nothing about ratios ) so what ever would bond well with those , i live in worthing west sussex.

Many thanks

Rob


wilkingj - 18/2/11 at 09:00 PM

Add your rough location to your profile then it shows every time...

Sorry I can't help with a diff


[Edited on 19/2/2011 by wilkingj]