Board logo

WANTED: Zetec water temp sender plug
dan8400 - 26/4/11 at 06:36 AM

As above really. Need the plug that goes in to the water temp sender unit so I can wire it up to the guage. A

Anyone got one?

Beer tokens await

Thanks
Dan

big_wasa - 26/4/11 at 06:41 AM

Dan is it a silver or black top ?

Water temp on a silvertop is just a mini timmer. Either way I think i will have one. can check when I get home from work.

dan8400 - 26/4/11 at 07:13 AM

Hi, it's a 1.8 silver top

Thanks
Dan


EDIT: it is the plug that screws in near the therm housing. Have the sender but not the plug/wire

[Edited on 26/4/11 by dan8400]

big_wasa - 26/4/11 at 11:30 AM

Two in the stat housing, Top is a big round one for the ecu (havnt got) Bottom is a square-ish one for the dash (have got). ????

[Edited on 26/4/11 by big_wasa]

dan8400 - 26/4/11 at 06:53 PM

Hi, not going to get a chance to have a look in the garage tonight. Off out in a bit. Can I let you know in the next day or two? Sorry to be a pain

Thanks
Dan