Need some multi connectors to make up an unplugable loom for my dash.
Any recommendations where to get some or even a kit of different ones for sensible money.

Got these from ebay. Theyre great.


Bulkhead Connector 1

VWP Connectors

I did mine with multiconnectors from the top of this page.

http://www.vehicle-wiring-products.eu/VWP-onlinestore/connectors/multiconnectors.php

If/when I do it again, I'd change them for one's like Richard's as the friction to get them together when fully populated is quite high.

Durite list several types in their catalogue which should be available from any decent motor factors although they may have to order them in

Try Simtek - they have the best range I have come across - better prices than most as well

Andrew

Cheers chaps .Great info as always.

I used 4 x 6 pin durite's on my dash makes it a breeze to whizz off and on again

[Edited on 3/10/11 by steve m]

ATX computer connectors from Maplins like this http://www.maplin.co.uk/atx-motherboard-power-connectors-44019?ordercode=L69AZ cheap as chips, simples.
Cheers,
Bob