Board logo

Mt75 reverse switch
ChrisLeary - 7/10/11 at 10:09 PM

Evening all,

As per the title really, does anyone have a spare, or know where I can source one? Im pretty sure mine's seen better days.

Thanks in advance,
Chris.

big_wasa - 8/10/11 at 08:07 AM

whats up with yours mate ? You can take them to bits and adjust/clean the contacts a little. If the plunger is worn build it up with a spot of glue.

Getting bits for these is much harder than a t9

ChrisLeary - 8/10/11 at 09:37 AM

quote:
Originally posted by big_wasa
whats up with yours mate ? You can take them to bits and adjust/clean the contacts a little. If the plunger is worn build it up with a spot of glue.

Getting bits for these is much harder than a t9


Morning wasa,

Thanks for the reply,

Well I tried to connect the multimeter up to it and there's only one connector inside the housing. I'm a complete novice with electronics, but being a switch I thought it'd have two connectors?

I am right in saying that its the black plastic box near the top of the box, half way along the housing on the left side (looking from the rear)??? Or am I looking at something completely different.

Cheers again,

Chris

DixieTheKid - 8/10/11 at 10:39 AM

I have a complete 2wd MT75 from a 2.0L DOHC Sierra for sale, dont really want to take the reverse switch of though.

big_wasa - 8/10/11 at 03:52 PM

Chris have you got a picture ?

There is more than one switch, Early ones had a big cover with built in mini timer plug and another with a fly lead and a plug on the end of it.

This is a modified one.




There are two contacts.

Dixie Where is it and how much ?