Board logo

Box Section
Minicooper - 6/11/11 at 07:30 PM

Hello,
I need about 225mm of 60*30 box section, around 2.5~3 wall thickness. Obviously will pay for postage and a drink or two. I have hundreds of feet of various box sections and tube but no 60*30

I'm based in Chandlers Ford, SO53 if anyone can help

Cheers
David

DavidM - 6/11/11 at 09:02 PM

If it is mild steel box section I think you will struggle as 60 x 30 isn't a standard size. 50 x 30 or 60 x 40 are the closest.

David

Minicooper - 6/11/11 at 09:26 PM

quote:
Originally posted by DavidM
If it is mild steel box section I think you will struggle as 60 x 30 isn't a standard size. 50 x 30 or 60 x 40 are the closest.

David


That's probably why I haven't got any! 50*30 would be fine if anyone has that

Cheers
David

Minicooper - 7/11/11 at 12:34 PM

60*40 would be acceptable as well, or even 60*60

Cheers
David

TAZZMAXX - 7/11/11 at 01:17 PM

I have an abundance of 50 x 30 x 3mm and some 60 x 40 x 3mm. What's your preference? U2U me some details and I can get a bit in the post if you like.

Minicooper - 7/11/11 at 01:39 PM

Sent U2U

Cheers
David

Minicooper - 9/11/11 at 04:06 PM

Thanks to TAZZMAXX,
Two bits of 50*30 turned up today

Cheers
David

TAZZMAXX - 9/11/11 at 04:30 PM

quote:
Originally posted by Minicooper
Thanks to TAZZMAXX,
Two bits of 50*30 turned up today

Cheers
David


Good, that was quick, they weren't sent till yesterday midday. I sent 2 pieces just in case of a taape measure malfunction!

Regards, Gareth