Board logo

Someone to make an alternator fitment
turnipfarmer - 3/2/12 at 01:12 PM

Is there someone out there who could make me an alternator fitting?

Something like this perhaps from 6mm plate ...

Zetec turbo fiesta turbo cvh alternator bracket XR,RS | eBay

Alternator pic in my archive. It's going onto a blacktop that's going into a 7-style.

I'd do it myself, but I haven't yet graduated from the Frank Spencer school of welding!

Let me know if you can & also what measurements you need.

Thanks

Dick Axtell - 3/2/12 at 03:54 PM

quote:
Originally posted by turnipfarmer.It's going onto a blacktop that's going into a 7-style.


After reading the E-Bay ad, Inoticed the seller's comment that "....you require the alternator lowering bracket when fitting it to a blacktop."

Won't this be a problem?

[Edited on 3/2/12 by Dick Axtell]

turnipfarmer - 3/2/12 at 04:12 PM

With that particular one it probably would.

However I've seen other threads on here where folk have done an almost identical design (albeit with different dimensions), precisely for the application I need.

So it's a "that sort of thing" rather than "specifically that"