Board logo

Wanted Xflow 1300 Inlet Manifold for Twin 40's
cfc999 - 9/2/12 at 11:23 PM

Need a 1300 inlet manifold for a set of twin 40's. Can't get my dizzy to fit with the one on the pic. I think it must be off a 1600. Will do a swap for the right one.
Cheers
Chris
Description
Description Description
Description

[Edited on 9/2/12 by cfc999]

[Edited on 10/2/12 by cfc999]

chicade - 10/2/12 at 08:22 AM

anygood ntdwm
eBay - The UK's Online Marketplace

cfc999 - 10/2/12 at 09:51 AM

quote:
Originally posted by chicade
anygood ntdwm
eBay - The UK's Online Marketplace


Thanks for the link but don't think its any different than the one I have. Needs to be for a 1300 I think.
Cheers
Chris

Alan M - 10/2/12 at 10:20 AM

Those carbs were mine! It is the correct manifold, the 1600 manifold is straight, not swan necked.
A dizzy will fit but you will need a side entry cap, even then it's very tight
I eventually went for a megajolt setup

cfc999 - 10/2/12 at 11:49 AM

quote:
Originally posted by Alan M
Those carbs were mine! It is the correct manifold, the 1600 manifold is straight, not swan necked.
A dizzy will fit but you will need a side entry cap, even then it's very tight
I eventually went for a megajolt setup

Thanks Alan.
Just sent you a u2u.
Cheers
Chris