Board logo

Wanted Propshaft
cfc999 - 23/2/12 at 09:54 PM

Need a propshaft for my xflow powered Striker. I'm running a live (english) axle and needs to be 645mm long.
Cheers
Chris

A1 - 24/2/12 at 02:59 AM

might be able to help you there... ill check tomorrow and let you know

will121 - 24/2/12 at 07:30 AM

Are you are running a 4 speed gear box? If so I will measure one I have in garage

cfc999 - 24/2/12 at 08:36 AM

quote:
Originally posted by will121
Are you are running a 4 speed gear box? If so I will measure one I have in garage

Yes I'm running a 4 speed box to a english axle.
Cheers Chris

cfc999 - 24/2/12 at 08:43 AM

quote:
Originally posted by A1
might be able to help you there... ill check tomorrow and let you know

Thanks for that. Keep me posted.
Cheers
Chris

TimEllershaw - 24/2/12 at 09:55 AM

quote:
Originally posted by cfc999
Need a propshaft for my xflow powered Striker. I'm running a live (english) axle and needs to be 645mm long.
Cheers
Chris


Would this be of use ?

May be a bit too long ?

From a Ford Type 3 gearbox ( 7/8" x 20 spline ) to English diff in a Westfield casing.

Propshaft
Propshaft
Prop End
Prop End
Prop end
Prop end

cfc999 - 24/2/12 at 10:58 AM

Needs to fit between a xflow 4 speed (thinks its called a type 2) and a english axle. Measured betwween the two and its 645mm.
Cheers
Chris
Description
Description
Description
Description

will121 - 24/2/12 at 04:57 PM

just measure my spare one and its overall 960mm long, was used with a 4 speed box with 16 spine end on it, may be of use if correct uj's if you want to modify and shorten it?

cfc999 - 27/2/12 at 10:41 AM

quote:
Originally posted by will121
just measure my spare one and its overall 960mm long, was used with a 4 speed box with 16 spine end on it, may be of use if correct uj's if you want to modify and shorten it?

Thanks for the offer. Might be of some use. What axle was the westfiled running. Also any idea how much you want for it and what would it cost to post to Lancshire.
Cheers
Chris

will121 - 27/2/12 at 09:00 PM

im sure it was a standard escort english axle, but ive taken some measurements on the first photo if you want to check it fits your axle, UJ's feel good and both have grease nipples
after £25 + postage which is about £8 for a 3-5day parcel





cfc999 - 27/2/12 at 09:39 PM

Thanks for the info. Will check and see how much its going to cost to shortened and get back to you.
Cheers
Chris

[Edited on 27/2/12 by cfc999]