Does anyone have a plug to connect to a silvertop Zetec temp sender (the one on the top of the thermostat housing)? I have a few looms but none seem to have this type of plug on (the round type).

Also after a plug for the Inlet Air Temp sender (round type as well).

Thanks in advance

Gary

Sorry Gary I don't have a spare temp sender but see you said you have a few looms. I don't suppose you have any spare ecu looms for a blacktop with 104 pins.

Good luck finding a temp sender anyhow

Hi tims,

It's not the sender i'm after, just the plug that connects to it (just clarifying for anyone who might be reading).

Anyway, I do have an engine loom for a 104 pin ECU. Do you need the injector loom that connects to it aswell?

Hi Gary,

I'm not sure of the state of my injector loom so if you have one of those too that would be great.

Where abouts are you in Lincolnshire?

I live in Spalding but work in Lincoln

I'm in Ruskington (just outside of Sleaford), so pretty much on your commute.

I pass Ruskington every day on the A15 so can pop in on my way home one day if your around - Have sent you a U2U

[Edited on 27/2/12 by tims31]