I am after a few bits for a honda engine rebuild.

1. Honda K24 Crankshaft (4 cylinder) Acura TSX or UK equivalent, may be Accord.
2. Honda H22A Rods & Pistons, from Prelude engine.
3. Honda s2000 oil jet bolts, new type.

2.4L S2000 engine?

Well that’s the aim, I have a totally standard s2000 engine which I intend to get my build up and running with, and as an ongoing project I will be building an s2400 if I can locate some cheap parts. I’ve just bought a spare s2000 engine so on the lookout for the rest. I may buy new pistons or at the very least a set of rings, but need my block horning out and understand it’s not the easiest job as the bores are coated.

Still after K24 crankshaft. Got new pistons & rings, 87.25 and found machine shop who can bore FRM, fingers crossed anyway. He can Hone as he bought the correct stones and has done a sucsessful test, I'm just unsure if you can hone from 87mm to 87.25 or whether it may need a re-bore first. Anyway I will leave that to him.


Description