Board logo

3.92 ATB 7" diff
sssline - 22/12/13 at 06:33 PM

Hi,
As above looking for a push in ATB LSD, Quaife or similar, ideally 3.92 .

Thanks
Tony.R

Or recommendations on good supplier/builder...

peter030371 - 23/12/13 at 09:22 AM

If you find two can I have one

prawnabie - 23/12/13 at 05:15 PM

It might open up more avenues if you look at getting an open 3.92 diff unit and put an ATB in that rather than looking for an ATB with that ratio.

Unless they don't do one in 7" if thats he case my apologies.

[Edited on 23/12/13 by prawnabie]

daniel mason - 23/12/13 at 05:23 PM

try blatchat. its common with the caterham guys to run a 7" diff with titan or zf lsd in that ratio. with push in shafts

sssline - 23/12/13 at 06:27 PM

Cheers for the relies, I'm running a 3.92 open diff at the moment so may go down the route of getting it converted, but thought it would be simpler to just swap units then sell off the open one

Will try blat chat thanks

Will also try the usual suppliers in the new year for quotes...

Thanks
Tony.R

peter030371 - 2/1/14 at 09:08 AM

Have you got anywhere with this yet?

The best price I have found is direct from Quaife but then I need to find a good price to fit it.

scimjim - 2/1/14 at 11:37 AM

I have several 3.92 open push in 7" diffs available if you want to convert one off the car?

sssline - 2/1/14 at 04:19 PM

Hi,
Think I will be going to Dave Rae, just need to pop in and have a chat over my needs etc, price quoted seemed fair.

Cheers
Tony.R

Ps, I'll pm re the open Diffs

sssline - 19/3/14 at 09:24 PM

Thought I'd update this, popped over to scimjim and did a deal on one of his open Diffs, nice workshop/ cave by the way, then dropped it off with Dave Rae for a full rebuild with Quaife ATB internals, week later picked it up, freshly painted numbered and looking good. It's now been installed for a week and so far so good, smooth quiet and working well.
Excellent service and advice from Dave, good price, and a good experiance all round.

Cheers
Tony.R