Hello all.

I'm currently doing some work for a friend on an ex 750MC locost racecar and am after a complete exhaust system for it. The old one got used on another racecar. Anybody got anything? It ideally needs to exit above the top chassis rail as the bonnet is cut out for it.

Thanks

Brian

I've got a manifold that goes over the rail...
I can take some pics/measurements if you want?

Yes that would be great if you could. Thanks.

Hi mate,

Sorry been a bit slow on this, i'll get pics and measurements for you tonight.

Cheers,
andy

Hi,

Some photos:





As you can probably see, there's a fair bit of surface rust, I'll try and clean this up a bit!

Measurements: about a foot from flange to inside bend, about a foot down to the bed before the backbox.
Inlet ports - 33mm
End - 50mm (outside measurement)

Looking for £50

Excellent thank you Andy. I'll have a measure up tonight.